![background image](http://html.mh-extra.com/html/canon/imagerunner-1670f/imagerunner-1670f_facsimile-manual_57584014.webp)
xiii
C. Power Requirements
This machine should be connected to a standard 120 volt AC, three-wire
grounded outlet only.
Do not connect this machine to an outlet or power line shared with other
appliances that cause “electrical noise.” Air conditioners, electric typewriters,
copiers, and machines of this sort generate electrical noise which often interferes
with communications equipment and the sending or receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the rear panel of this equipment is a label that
contains, among other information, a product identifier in the format of
US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of
devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming
call. In most, but not all areas, the sum of the RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. The REN for
this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
An FCC compliant telephone line cable and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network
or premise wiring using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures
described in this guide or the
Reference Guide
, disconnect the equipment from
the telephone line cable and disconnect the power cord. The telephone line cable
should not be reconnected or the power cord connected until the problem is
completely resolved. Users should contact their local authorized Canon Facsimile
Service Dealer for the servicing of equipment.
**FG_FM 3/5/04 10:46 AM Page xiii
Summary of Contents for IMAGERUNNER 1670F
