Loading rolls in the Roll 1 (Upper) holder
1
Press the
Load
button.
2
Press
▲
or
▼
to select
Roll 1 (Upper)
, and then press the
OK
button.
Note
•
If any cut sheet has been fed, or roll paper that will not be used has been fed from Roll 1 (Upper), a
message is shown requesting you to remove it.
Press
▲
or
▼
to select
Yes
, and then press the
OK
button. Remove the paper and go to the next step.
•
If roll paper is loaded in Roll 1 (Upper) but Roll 1 (Upper) is not selected as the paper source, a message
asking you whether or not to change paper is displayed.
Press
▲
or
▼
to select
Load
, and then press the
OK
button. Remove the paper and proceed to the next
step.
3
Open the Top Cover and lift the Ejection Guide.
4
Holding the Roll Holder so that the side with the white
gear faces the side of the Roll Holder Slot with a
white gear, load the Roll Holder shaft (a) into the
grooves (b) on both ends of the Roll Holder Slot.
b
a
b
a
Loading Rolls in the Printer
iPF840 Series
Handling Paper
Handling rolls
16
