Canon imagePROGRAF W7200, Network Manual

Page: 69 / 74

List of Network Settings
3
6-3
List of Network Settings
If you are using a Web browser (Remote UI), you can change the settings of
the network interface board. The settings that can be changed are listed in the
tables below.
„
General Settings
„
TCP/IP Settings
Item Description Initial Value
Device Name Device name (Range: 0 to 32 chars.) Blank
Location Device location (Range: 0 to 32 chars.) Blank
Administrator
Name of Administrator for the device (Range: 0
to 32 chars.)
Blank
Phone
Telephone number of the Administrator (Range:
0 to 32 chars.)
Blank
Comments (E-mail) Administrator Comments (Range: 0 to 32 chars.) Blank
Password Device password (Range: 0 to 15 chars.) Blank
Item Description Initial Value
Use DHCP
The setting in the IP address that determines
whether DHCP is used.
Off
Use BOOTP
The setting in the IP address that determines
whether BOOTP is used.
Off
Use RARP
The setting in the IP address that determines
whether RARP is used.
Off
IP Address The IP address of the printer. 192.168.0.215
Subnet Mask The subnet mask 255.255.255.0
Gateway Address The gateway address. 0.0.0.0