Canon imagePROGRAF W7200, Network Manual

Page: 44 / 74

NetWare
®
Settings (Windows)
2
4-2
Important
Procedures Required for a NetWare
®
Network
Here is a summary of the procedures required to set the printer for use on a
NetWare
®
network.
z
Steps 1, 2, 3, 4 should be performed by the network system administrator.
1 Connect the network cable
Æ
Setup Guide
Follow the instructions in the Setup Guide to connect the network cable.
2 Setting the Printer Frame Type
Æ
P.4-3
Set the frame type to select the printer protocol. You can perform this setting with the GARO
Device Setup Utility (Canon software application provided with the printer) or you can use the
printer operation panel.
3 Setting Up a NetWare
®
Print Service Æ P.4-6
Perform the settings for the NetWare
®
service. You can perform these settings on the computer
with one of the following applications:
• NWADMIN or PCONSOLE (Novell software application provided with NetWare
®
)
4 Setting NetWare
®
Printer Protocol
Æ
P.4-11
Perform this procedure to set the printer protocol. You can perform these settings with the web
browser from a computer on the network:
• Web Browser (Remote UI)
5 Setting the Computer for NetWare
®
Æ P.4-18
Perform these settings on every computer to be used with the printer.