Canon imagePROGRAF W7200, Network Manual

Page: 48 / 74

NetWare
®
Settings (Windows)
6
4-6
Important
Note
Setting Up a NetWare
®
Print Service
In order to print on a NetWare
®
network, you must set the printer server,
queue, and other settings. You can use the software applications below to
perform the print service settings from the computer that you are using.
• NWADMIN or PCONSOLE (Novell software applications provided with
NetWare
®
)
z
If you perform the print service settings with NWADMIN, Novell Client (the
Novell NetWare
®
client) must be installed as the client software application.
z
The following procedure describes the print service settings for NetWare
®
. The
procedure may be slightly different for your network environment.
Types of Print Services
Before performing the print service settings, be sure to read the description
below then select the printer service type.
z
You can also NDPS as the print service for NetWare
®
. If you use NDPS as the print
service, for the gateway use the Novell printer gateway provided by Novell. The
setup procedure for NDPS is not described in this manual, so please refer to your
NetWare
®
instructions for details.
z
NDS (Novell Directory Service) and Bindery
Both NDS and Bindery are compatible. You can select either, depending
on the requirements of your network environment.
z
Queue server mode and remote printer mode
The queue server mode and the remote printer mode are both compatible.
• Queue server mode
When the queue server mode is used, the hardware and software for other
print servers is not required because queue server mode contains all the
print server functions. In NDS queue server mode (NDS PServer), the
NDS print server is used to print. In the bindery queue server mode
(Bindery PServer), the bindery print server is used to print. In the queue
server mode, one NetWare
®
license is required for every network
interface used in the network.