Canon imagePROGRAF W7200, Network Manual

Page: 40 / 74

AppleTalk Network Settings (Macintosh)
8
3-8
Important
Note
Important
z
If more than one printer is in the same zone, be sure to assign a unique name for
each printer.
z
The initial name for the Name setting is “Canon NB-12FB”, the name of the
network interface.
z
When you change the name, you can enter a name up to 15 characters long.
However, @ * ; and = cannot be used in the name.
7
When a zone is set on the network, enter the name of the printer's
zone.
If no zone is set, then leave the asterisk (*) entry as it is.
z
If a zone is set, the zone name must be entered. If the name of a zone where the
printer is not located is entered, then the Macintosh computer can no longer
recognize the printer. Contact your network system administrator for more details
about the zone name.
8
Click the OK button.
9
When you return to the Network screen of the Device Manager, click
the Reset button.
The printer network interface restarts and enables the settings.
This completes the printer protocol settings.