Canon imagePROGRAF TA-30 Online Manual Download Page 248

Page: 248 / 927

Receiving Printer Status by E-mail

You receive the printer status information such as the remaining ink level and the error from the printer.

*This function may not be available depending on the country or region of purchase.

Note

• Specify the mail server settings in advance.

Setting Mail Server

• If you did not specify the date and time setting using the printer's operation panel, the date and time

may not be reflected on the sent e-mail. We recommended that you set the date and time setting using
the printer's operation panel.

For the date and time setting, see

Other device settings

• These functions can be set only when you are logged in administrator mode.

Start up Remote UI.

Select

Device settings

Select

Status notification e-mail

Select

Notification recipients

Specify destination settings.

Up to 5 destinations can be registered by following the steps below.

Select number of destination.

Select

Add

Enter e-mail address, and then select printer status to send information.

Select

The registration for destination is completed.

Select

Device settings

Status notification e-mail

Retry settings

Specify resending settings.

The number of resending can be specified by following the steps below.

Specify number of resending.

Specify interval of resending.

248

Summary of Contents for imagePROGRAF TA-30
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePROGRAF TA-30

Reviews:

Related manuals for imagePROGRAF TA-30

Brands by name

Popular brands

Canon imagePROGRAF TA-30, Online Manual

Search results

Summary of Contents for imagePROGRAF TA-30

Reviews:

Related manuals for imagePROGRAF TA-30

Brands by name

Popular brands