Canon imagePROGRAF iPF760, User Manual

Page: 103 / 686

14
Select the
H
Borderless Printing check box.
15
Click
E
Fit Paper Size under
D
Enlarged/Reduced Printing .
16
In
I
Paper Size , click the paper size. In this case, click 10"x12" - Borderless .
17
Confirm the print settings, and then click
M
Print to start printing.
Note
•
For tips on confirming print settings, see " Confirming Print Settings(Mac OS X)
→P.327
"
Borderless Printing by Resizing Originals to Fit the Roll Width Borderless Printing by Resizing Originals to Fit the Roll Width
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) with-
out a surrounding margin, or border.
• Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you can
print documents without the margin, so that the printed image covers the entire surface of the paper.
Important
•
Borderless printing is only available with rolls.
•
Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. For
information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See "
Types of
Paper
→P.434
")
•
Paper incompatible with the printer's auto cut function can be printed without borders on the left and right sides only.
•
These features cannot be used in combination with borderless printing: special page layouts, centering originals, and
printing cut lines on rolls.
•
If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing borderless printing,
Rotate Page 90 degrees (Conserve Paper) cannot be selected.
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the
edges. If you require higher image quality, specify
No in Auto Cut in the printer driver. In this case, the paper can be
printed without borders on the left and right sides only. After ejecting and cutting the printed document, use scissors to
cut away the top and bottom edges.
•
By factory default, the ink drying time is disabled for all paper. When you are using paper that takes longer for ink to
adhere for borderless printing and the Cutter Unit touches printing surfaces that are not dry yet, it may damage the
paper or the edge of the document that is cut, depending on frequency of use. In this case, follow these steps to change
the ink drying time.
•
On the Main sheet of the printer driver, click Settings in Media Type .
•
Select the ink drying time in the Between Pages list of Drying Time .
• Borderless Printing Method
Choose the method of borderless printing that suits the original, as desired.
iPF760 Borderless Printing by Resizing Originals to Fit the Roll Width
User's Guide
Enhanced Printing Options
Borderless Printing
103