Canon IMAGEPRESS C6010S Operating Information Manual Download Page 182

Page: 182 / 388

Description

Values

Setting

'Auto'
The automatically set value from the original docu-
ment.

'Header up LEF'
Deliver the prints with the header on top side and in
portrait position (vertical).

'Header up SEF'
Deliver the prints with the header on top side and in
landscape position (horizontal).

'Header down LEF'
Deliver the prints with the header at the bottom side
and in portrait position (vertical).

'Header down SEF'
Deliver the prints with the header at the bottom side
and in landscape position (horizontal).

■

'Front/back'
Default value. The front page on the front, the
back page on the back.

■

'Back/front'
Puts the front page on the back and the back page
on the front.

'Advanced
settings' ->
'Print order'

■

'0 degrees'

■

'180 degrees'
Rotates the prints 180 degrees.

'Advanced
settings' ->
'Rotation'

Chapter 7 - Copy jobs

182

Description of the copy job settings

Summary of Contents for IMAGEPRESS C6010S





































































































































































































































































































































































































Search results

Summary of Contents for IMAGEPRESS C6010S

Reviews:

Brands by name

Popular brands

Canon IMAGEPRESS C6010S, Operating Information Manual

Search results

Summary of Contents for IMAGEPRESS C6010S

Reviews:

Brands by name

Popular brands