imageFORMULA DR-G1130/DR-G1100 Series Service Guide
imageFORMULA DR-G1130/DR-G1100 Series Service Guide
April 2013
Rev. 1
Page 11
H. Recommended Replacement Parts
The Recommended Replacement Parts in the following table are suggested to be
kept in stock by the Dealer, for replacement purposes, in the event of a hardware
failure.
Note: All recommended replacement parts shown in the below table are for
reference purposes only and are subject to change without notice.
Recommended Replacement Parts (Table 10)
Part Name
Part Number
Quantity
Remarks
Registration roller lower
MF1-4795-000
1
Because of the worn rollers, it is
necessary to replace them when
a document jams or feed failures
occur after the roller cleaning.
Note:
1) The parts that are marked *1
are used in the parts catalog.
2) Because of the expected life of
electrical conductivity, replace the
bearing at the same time. The
parts numbers are different, but
specifications are the same as the
imageFORMULA DR-9050C.
3) The registration roller upper-
front and reading roller upper are
the same shape, but its color of
gear is different. Registration
roller one is black and the reading
roller is white.
Bearing
MS2-9004-000
2
Platen roller
MA2-8591-000
2
Bearing
MS2-9003-000
4
Reading roller lower
MF1-4597-000
1
Bearing
MS2-9004-000
2
Front U-turn roller (drive)
(ROLLER, U-TURN PRE,
LOWER *1)
MA2-8646-000
1
Bearing
MS2-9004-000
4
Rear U-turn roller (drive)
(ROLLER, U-TURN,
LOWER *1)
MA2-8647-000
1
Bearing
MS2-9004-000
2
Eject roller (drive)
MA2-8733-000
1
Bearing
MS2-9004-000
2
Registration roller upper-
front
MF1-4797-000
1
Bearing
MS2-9003-000
2
Reading roller upper
(ROLLER,
REGISTRATION UPPER
*1)
MF1-4242-000
1
Bearing
MS2-9003-000
2
Front U-turn roller
(follower) (ROLLER,
READING UPPER *1)
MA2-6847-000
1
Bearing
MS2-9003-000
2
Rear U-turn roller
(follower) (ROLLER, U-
TURN, UPPER *1)
MA2-8665-000
2
Bearing
MS2-9003-000
4
Eject roller (follower)
MG1-4801-000
1
Upper reading unit (front)
MG1-8318-000
1
Replace if an image failure occurs.
Lower reading unit (Back)
MG1-8319-000
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
