![background image](http://html1.mh-extra.com/html/canon/imageclass-mf6500-series/imageclass-mf6500-series_advanced-manual_4203813108.webp)
1
2
3
4
5
6
7
8
7-9
■
Receiving Problems
Cannot receive a fax automatically.
Q
Is the machine set to receive automatically?
A
For the machine to receive faxes automatically,
receive mode must be set to <FaxTel>, <FaxOnly>,
or <AnsMode>. If you have set <AnsMode>,
confirm that an answering machine is connected to
the machine and that it is turned on with an
outgoing message properly recorded. (See
“Setting Receive Mode,” on p. 1-8.)
Q
Is a document stored in memory, leaving little
or no memory available?
A
Print, send, or delete any documents stored in
memory.
Q
Has an error occurred during reception?
A
Check the LCD for an error message. (See
Chapter 12, “Troubleshooting,” in the Basic Guide.)
A
Print an Activity Report and check for an error.
(See “ACTIVITY REPORT,” on p. 6-5.)
Q
Is paper loaded in the machine?
A
Make sure paper is loaded in the machine. (See
“Set Up the Machine,” in the Starter Guide.)
Q
Is the telephone cable connected properly?
A
Make sure the cable is connected properly. (See
“Set Up the Machine,” in the Starter Guide.)
No automatic switching between telephone and fax calls.
Q
Is the machine set to switch automatically
between telephone and fax calls?
A
For the machine to switch between fax and
telephone calls automatically, the receive mode
must be set to <FaxTel>, <AnsMode>, or <DRPD>.
If you have set <AnsMode>, confirm that an
answering machine is connected to the machine
and that it is turned on with an outgoing message
properly recorded. (See “Setting Receive Mode,”
on p. 1-8.)