![background image](http://html1.mh-extra.com/html/canon/imageclass-mf6500-series/imageclass-mf6500-series_advanced-manual_4203813046.webp)
1
2
3
4
5
6
7
8
3-5
Interface Settings
Ethernet Driver
You can specify the communication method and Ethernet
connection type.
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <NETWORK
SETTINGS>, then press [OK].
4.
Use [
] or [
] to select <ETHERNET
DRIVER>, then press [OK].
5.
Confirm that <AUTO DETECT> is displayed,
then press [OK].
6.
Use [
] or [
] to select the desired
detection method, then press [OK].
<AUTO>: Automatically determines the communication mode
(Half duplex/Full duplex) and Ethernet type (10Base-T/100Base-
TX). Skip to step 11.
<MANUAL>: You have to manually specify the communication
mode and Ethernet type.
NOTE
If you reconnect the network cable (for example, reconnect the
cable to a different Ethernet hub) with the power on, the Auto
Detect function will not work even if you set <AUTO DETECT> to
<AUTO>. (Connect the cable with the power off.)
7.
Confirm that <DUPLEX> is displayed, then
press [OK].
8.
Use [
] or [
] to select the desired
communication method, then press [OK].
<HALF DUPLEX>: Sends and receives alternately.
<FULL DUPLEX>: Sends and receives simultaneously.