Canon ImageCLASS MF4690, Service Manual

Page: 77 / 182

Chapter 7
7-1
7.1 Overview/Configuration
7.1.1 Overview
0016-1844
The pickup/feeding system is the part to pickup and feed a paper, and it is composed of the main motor, solenoid, and various motors.
In this machine, a paper is picked up from either the pickup tray or the manual feed tray, and it is delivered from the delivery tray.
A paper set in either the pickup tray or the manual feed tray is picked up with the same pickup roller. Then, it is fed to the photosensitive drum, transfer charging
roller, fixing film, pressure roller, and face-down delivery roller, in that order, and is delivered to the delivery tray.
On the feed path of a paper, the following 4 photointerrupters are allocated: the leading edge/paper width sensor (PS801, PS802), delivery sensor (PS803), and
delivery paper width sensor (PS804), and they detect either the arrival or passage of paper.
If a paper does not arrive or pass each sensor, except the fixing paper width sensor, within the predetermined time, CPU on the DCNT board judges as a jam and
notify the occurrence of jam to the SCNT board.
The diagrammatic illustration for each motor, solenoid, and sensor is shown below.
F-7-1
[1] Face-down delivery roller
[2] Pressure roller
[3] Fixing film unit
[4] Transfer charging roller
[5] Photosensitive drum
[6] Pickup roller
[7] Separation pad
[8] Manual feed tray
[9] Pickup tray
M1: Main motor
SL1: Pickup solenoid
PS801: Leading edge sensor
PS802: Paper width sensor
PS803: Delivery sensor
PS804: Delivery paper width sensor
7.2 Other Control
7.2.1 Overview
0016-1845
Pickup/Feed Operation
The pickup/feed assembly is the mechanism to pickup and feed paper one at a time from the pickup tray or the manual feed tray.
SCNT
[1]
PS804
PS803
[3]
[2]
[4]
[5]
PS801
PS802
SL1
[6]
[7]
M1
[8]
[9]