Canon ImageCLASS MF4690 Service Manual Download Page 134

Page: 134 / 182

Chapter 13

13-4

##0288

[Tx]

after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0289

[Tx]

after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0290

[Tx]

after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0670

[Tx]

at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected to be detected, and the CI signal is
expected to be transmitted in response; however, the procedure fails to advance, and the line is released because of T1 time-
out.

##0671

[Rx]

at time of V.8 arrival, procedure fails to move to phase 2 after detection of CM signal from caller, causing T1 time-out
and releasing line

##0672

[Tx]

at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release
the line and suffer T1 timeout.

##0673

[Rx]

at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release
the line and suffer T1 timeout.

##0674

[Tx]

at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops,
causing the machine to release the line and suffer T1 timeout.

##0675

[Rx]

at time of V.34 reception, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops, causing
the machine to release the line and suffer T1 timeout.

##0750

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-NULL, causing the procedural
signal to be transmitted more than specified.

##0752

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-NULL.

##0753

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
NULL, or T5 time-out (60 sec) has occurred.

##0754

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
NULL.

##0755

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-MPS, causing the procedural signal
to be transmitted more than specified.

##0757

[Tx]

at time of ECM transmission, DCN is received after retransmission of PPS-MPS.

##0758

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS,
or T5 time-out (60 sec) has occurred.

##0759

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS.

##0760

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOM, causing the procedural
signal to be transmitted more than specified.

##0762

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOM.

##0763

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS,
or T5 time-out (60 sec) has occurred.

##0764

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
EOM.

##0765

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOP, causing the procedural signal
to be transmitted more than specified.

##0767

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOP.

##0768

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP,
or T5 time-out (60 sec) has occurred.

##0769

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP.

##0770

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-NULL, causing the procedural
signal to be transmitted more than specified.

##0772

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-NULL.

##0773

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-
NULL, or T5 time-out (60 sec) has occurred.

##0774

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-NULL.

##0775

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-MPS, causing the procedural
signal to be transmitted more than specified.

##0777

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-MPS.

##0778

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission EOR-MPS,
or T5 time-out (60 sec) has occurred.

##0779

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-MPS.

##0780

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOM, causing the procedural
signal to be transmitted more than specified.

##0782

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-EOM.

##0783

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-
EOM, or T5 time-out (60 sec) has occurred.

##0784

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-EOM.

##0785

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOP, causing the procedural
signal to be transmitted more than specified.

##0787

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-EOP.

##0788

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-
EOP, or T5 time-out (60 sec) has occurred.

##0789

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-EOP.

##0790

[Rx]

at time of ECM reception, ERR is transmitted after transmission of EOR-Q.

##0791 [Tx/Rx]

while

ECM

mode procedure is under way, a signal other than a meaningful signal is received.

##0792

[Rx]