Canon imageCLASS LBP7110Cw Manual Download Page 427

Page: 427 / 514

0F40-07X

Perform one of the following solutions according to the cause.

<Cause 1> The printer is not turned ON.

Solution

Turn the printer ON.

<Cause 2> The USB cable is not connected properly.

Solution

Make sure that the printer and computer are properly connected with the USB cable.

"Connecting the Printer and Computer"

<Cause 3> The USB cable was already connected and the printer was turned ON before the
printer driver was installed.

Solution

Perform the following procedure.

1. Turn the printer OFF.

2. Disconnect the USB cable.

3. Connect the USB cable again.

4. While the following screen appears, turn the printer ON.

<Cause 4> An inappropriate USB cable is being used.

Solution

Use a USB cable that is appropriate for the USB interface environment of the printer and has the following
symbol.

The following is the USB interface environment of this printer.

Hi-Speed USB
USB

<Cause 5> The USB class driver is installed.

Solution

Uninstall the USB class driver.

"Uninstalling the USB Class Driver"

The Printer Is Not Recognized Automatically

㻠㻞㻣㻌㻛㻌㻡㻝㻠

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imageCLASS LBP7110Cw



































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP7110Cw

Reviews:

Related manuals for imageCLASS LBP7110Cw

Brands by name

Popular brands

Canon imageCLASS LBP7110Cw, Manual

Search results

Summary of Contents for imageCLASS LBP7110Cw

Reviews:

Related manuals for imageCLASS LBP7110Cw

Brands by name

Popular brands