Canon imageCLASS D1120, Basic Operation Manual

Page: 151 / 305

Fax (D1180/D1170/D1150)
6-20
Specifying Destinations
Using the One-Touch Keys
You can specify up to 20 destinations using one-
touch keys.
To use this feature, you need to first register destinations in
one-touch Keys. (See “Storing/Editing One-Touch Keys,” on
p. 5-3.)
A maximum of 201 destinations can be specified at the same
time. (Out of the 200 destinations, a number or address can be
specified with – , [numeric keys] and [Tone].) If you
specify a group, which is made up of several destinations,
each destination in the group is counted as a separate
address.
1
Place documents.
2
Press [SEND/FAX]/ [FAX].
3
Press [SEND/FAX] repeatedly to
select <FAX>, then press [OK].
S E L E C T : O K
F A X
For the D1150, skip this step.
4
Press the desired one-touch key (01 to
20).
[ 0 1 ] J o h n
T E L = 1 2 3 X X X X X X X
Ex.
If you pressed a wrong key, press
[Stop/Reset], then try again from step 3.
–
–
5
Press [Start].
When you place the documents on the platen
glass, press or to select the document
size, then press [Start] for each document.
When scanning is complete, press [OK] to
start sending.
You can also adjust the following scan
settings as necessary, using the keys on the
operation panel, after specifying the
destination in step 4.
Density: See “Adjusting Density,” on p. 6-29.
Image Quality: See “Selecting Image Quality,”
on p. 6-30.
2-Sided: See “2-Sided Documents,” on p. 6-
31.
When <TIME OUT> is set to <ON> in <TX
SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the
destination by any other method than using –
, [numeric keys] and [Tone], the machine
starts scanning automatically without pressing
[Start], after the preset time for this setting is
elapsed. (See “Time Out Mode,” on p. 6-41.)
Using Coded Dial Codes
You can specify up to 180 destinations using coded
dial codes.
To use this feature, you need to register destinations in coded
dial code beforehand. (See “Storing/Editing Coded Dial Codes,”
on p. 5-12.)
A maximum of 201 destinations can be specified at the same time.
(Out of the 200 destinations, a number or address can be specified
with – , [numeric keys] and [Tone].) If you specify a
group, which is made up of several destinations, each destination in
the group is counted as a separate address.
–
–
•
•
•
–
–