Canon i-SENSYS LBP5300 Series, Service Manual

Page: 111 / 150

Chapter 3
3-25
F-3-182
3.4.11 Duplexing Flapper Solenoid
3.4.11.1 Preparation for Removing the Duplexing Flapper
Solenoid
0014-4985
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the rear cover. (page 3-1) [Removing the Rear Cover]
2) Remove the fixing assembly.
(page 3-25)
[Removing the Fixing
Assembly]
3) Detach the upper cover. (page 3-2) [Removing the Upper Cover]
4) Detach the duplexing driver PCB.
(page 3-10)
[Removing the Duplexing
Driver PCB]
3.4.11.2 Removing the Duplexing Flapper Solenoid
0014-4988
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Free the claw [1] of the bushing.
F-3-183
2) Turn the bushing [1] to pull it out in the direction of the arrow.
F-3-184
3) Remove the duplexing feed roller [1] in the direction of the arrow.
F-3-185
4) Remove the duplexing reversing assembly [1].
- 2 screws [2]
F-3-186
5) Remove the duplexing reversing drive assembly [1].
- 2 screws [2]
F-3-187
6) Free the cable from the guide to remove the duplexing flapper solenoid
[1].
- 1 screw [2]
F-3-188
3.5 FIXING SYSTEM
3.5.1 Fixing Assembly
3.5.1.1 Removing the Fixing Assembly
0013-9855
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Open the upper cover.
2) Remove the fixing assembly [2] while pushing the fixing assembly lock
lever [1] (two points on the left and right sides).
F-3-189