Canon i-SENSYS LBP5300 Series, Service Manual

Page: 28 / 150

Chapter 1
1-12
TCP/IP SETTINGS
IP MODE MANUAL*, AUTO
PROTOCOL PROTOCOL is displayed only when IP MODE is
set to AUTO.
DHCP OFF*, ON
BOOTP OFF*, ON
RARP OFF*, ON
IP SETTINGS
IP ADDRESS 0.0.0.0*
SUBNET MASK 0.0.0.0*
GATEWAY ADDRESS 0.0.0.0*
DNS
PRIMARY ADD. 0.0.0.0*
SECONDARY ADD. 0.0.0.0*
WIN
S ON, OFF*
ARP
/
PIN
G ON*, OFF
FTP
FTP PRINT ON*, OFF
FTP SETTINGS ON*, OFF
LPD PRINT ON*, OFF
RAW PRINT ON*, OFF
BMLinkS OFF*, ON
IPP PRINT ON*, OFF
HTTP ON*, OFF
SNTP ON*, OFF
RESPONSE ON*, OFF
IP ADD.RANGE
REJECT RX/PRT OFF*, ON
REJECT ADD.SET. reject IP address 1 through reject IP address 8 REJECT ADD.SET. and PERMIT ADD.SET. are
displayed only when REJECT RX/PRT, PERMIT
RX/PRT, REJ SET/BROWSE, PMT SET/
BROWSE, or PERMIT RECEIVE is set to ON.
PERMIT RX/PRT OFF*, ON
PERMIT ADD.SET. permit IP address 1 through permit IP address 8 REJECT ADD.SET. and PERMIT ADD.SET. are
displayed only when REJECT RX/PRT, PERMIT
RX/PRT, REJ SET/BROWSE, PMT SET/
BROWSE, or PERMIT RECEIVE is set to ON.
REJ SET/BROWSE OFF*, ON
REJECT ADD.SET. permit IP address 1 through permit IP address 8 REJECT ADD.SET. and PERMIT ADD.SET. are
displayed only when REJECT RX/PRT, PERMIT
RX/PRT, REJ SET/BROWSE, PMT SET/
BROWSE, or PERMIT RECEIVE is set to ON.
PMT SET/BROWSE OFF*, ON
PERMIT ADD.SET. permit IP address 1 through permit IP address 8 REJECT ADD.SET. and PERMIT ADD.SET. are
displayed only when REJECT RX/PRT, PERMIT
RX/PRT, REJ SET/BROWSE, PMT SET/
BROWSE, or PERMIT RECEIVE is set to ON.
MAC ADDRESS SET
PERMIT RECEIVE OFF*, ON
PERMIT ADD.SET. permit MAC address 1 through permit MAC address 50 REJECT ADD.SET. and PERMIT ADD.SET. are
displayed only when REJECT RX/PRT, PERMIT
RX/PRT, REJ SET/BROWSE, PMT SET/
BROWSE, or PERMIT RECEIVE is set to ON.
AppleTalk ON*, OFF This item is displayed only when NETWORK in the
I/F ONNECTION options is set to ON.
SMB
SMB SERVER OFF*, ON
SMB OFF*, ON SMB is displayed only when an optional hard disk
is installed, HARD DISK is set to ON, and SMB
SERVER is set to ON.
SNMP ON*, OFF This item is displayed only when NETWORK in the
I/F CONNECTION options is set to ON.
SPOOLER OFF*, ON This item is displayed only when NETWORK in the
I/F CONNECTION options is set to ON, an
optional hard disk is installed, and HARD DISK is
set to ON.
START WAIT TIME 0 to 300 (0*) This item is displayed only when NETWORK in the
I/F CONNECTION options is set to ON.
REMOTE UI SET. This item is displayed only when NETWORK in the
I/F CONNECTION options is set to ON.
REMOTE UI ON*, OFF
Item Setting Notes