Canon G3030 Series Online Manual Download Page 312

Page: 312 / 438

Make sure any original has been removed from platen.

Open document tray (A).

Slide the document guide (B) all the way out.

Note

• The location and number of document guides may vary depending on your model.

Load document with side to scan facing up in document tray.

Insert the document until it stops.

Adjust document guide to match width of document.

Do not slide the document guide too hard against the document. The document may not be fed
properly.

312

Summary of Contents for G3030 Series























































































































































































































































































































































































































































Search results

Summary of Contents for G3030 Series

Reviews:

Related manuals for G3030 Series

Brands by name

Popular brands

Canon G3030 Series, Online Manual

Search results

Summary of Contents for G3030 Series

Reviews:

Related manuals for G3030 Series

Brands by name

Popular brands