Canon Finisher-R1, Service Manual

Page: 86 / 177

Chapter 4
4-11
4.2 Drive System
4.2.1 Stapler
4.2.1.1 Removing the Front
Cover
0004-8065
1) Remove screw [1] and remove the foot cover [2].
F-4-36
2) Open the front door [3] and remove three screws
[4].
3) Remove the front cover [5].
F-4-37
4.2.1.2 Removing the Stapler
0004-4570
1) Pull out the stapler, remove screw [1], and remove
the PCB cover [2].
F-4-38
2) Release the claw [3] and remove the PCB [4].
3) Disconnect three connectors [5].
4) Remove screw [6] and remove the stapler together
with the stapler base [7].
When removing, be careful not to damage the flag
[8].
F-4-39
5) Turn the stapler over, disconnect two connectors
[9], remove two screws [10], and remove the stapler
from the stapler base.
[1]
[2]
[3]
[4]
[5]