Canon Finisher-R1, Service Manual

Page: 54 / 177

Chapter 3
3-2
T-3-1
3.1.2
Installing the Accessories
0003-1756
If you are installing the machine and other accessories at the same time, install the host machine, and then install the
accessories in the following order:
1.Side paper deck (see its Installation Procedure)
2.Finisher [1], [2] (See “Preparing the Finisher for Installation” herein)
3.Additional finisher tray [3] (see its Installation Procedure)
4.Puncher unit [4] (see its Installation Procedure)
5.Connection with the host machine (See the instructions herein or “Connecting to the Host Machine” in the
“Puncher Unit Installation Procedure”)
<Finisher-R1> <Saddle Finisher-R2>
[1]Inlet guide upper 1 pc. [1]Inlet guide upper 1 pc.
[2]Inlet guide lower 1 pc. [2]Inlet guide lower 1 pc.
[3]Fixing plate (FC5-4196) 2 pc. [3]Fixing plate (FC5-4196) 1 pc.
[5]Staple cartridge 1 pc. (3 blocks) [4]Fixing plate (FC5-4976) 1 pc.
[7]Front foot cover 1 pc. [5]Staple cartridge 1 pc. (3 blocks)
[9]Rail 1 pc. [6]Saddle staple cartridge 1 pc. (2 blocks)
[10]Cable clamp 1 pc. [7]Front foot cover 1 pc.
[11]Screw (RS tightening; M3x8) 1 pc. [8]Rear foot cover 1 pc.
[12]Screw (tapping; M4x12) 2 pc. [9]Rail 1 pc.
[13]Screw (binding; M4x6) 6 pc. [10]Cable clamp 1 pc.
[14]Screw (stepped; M4) 2 pc. [11]Screw (RS tightening; M3x8) 1 pc.
[15]Tray label 1 pc. [12]Screw (tapping; M4x12) 3 pc.
[16]Settings label 1 pc. [13]Screw (binding; M4x6) 6 pc.
[14]Screw (stepped; M4) 2 pc.
[15]Tray label 1 pc.
[16]Settings label 1 pc.
[17]Bookmaking label 1 pc.