Canon Finisher-R1, Service Manual

Page: 99 / 177

Chapter 4
4-24
F-4-81
7) Disconnect the connector [16] and remove harness
from the clamp and edge saddle [17].
8) Remove two screws [18] and pull out the
processing tray [19] in the paper delivery direction.
When removing parts inside the processing tray,
be careful not to exert force on the aligning plate
(front/rear) or the rear end stopper plate.
F-4-82
4.3.2 Tray 1
4.3.2.1 Removing the Front
Cover
0004-8072
1) Remove screw [1] and remove the foot cover [2].
F-4-83
2) Open the front door [3] and remove three screws
[4].
3) Remove the front cover [5].
F-4-84
4.3.2.2
Removing the Rear
Cover
0004-4551
1) Remove three screws [1] and remove the rear cover
[2].
[1]
[2]
[3]
[4]
[5]