Canon Finisher-R1, Service Manual

Page: 47 / 177

Chapter 2
2-23
Feed path
sensor
delay PI34 When the feed path sensor (PI34) does not detect
paper after prescribed time (distance) has
elapsed since the inlet sensor (PI33) detected
paper. 1004
Feed path
sensor
stationary PI34 When paper does not exit the feed path sensor
(PI34) after delivering for a prescribed time
(distance) after the delivery sensor (PI34) has
detected paper. 1104
Timing PI33 When the inlet sensor (PI33) detects paper
before receiving a delivery signal from the host
machine. 1200
Staple PI50 When the staple motor (M41) is rotated forward
and the staple home position sensor (PI50) does
not turn on within prescribed time after it is
turned off and the staple motor (M41) is rotated
backward and the staple home position sensor
(PI50) turns on within prescribed time. 1500
Power-on PI33,PI34 When paper is detected by the inlet sensor (PI33)
or the delivery path sensor (PI34) during power
on. 1300
Door open PI31,PI32,
MS31 When the upper cover open/close sensor (PI31),
front cover open/close sensor (PI32), or the front
cover close detect switch (MS31) detects that the
cover is opened. 1400
Jam Type Sensor Jam Condition Code