Canon FAXPHONE B95 User Manual Download

Page: 22 / 116

1-10

Testing the fax _________________________________

After you have assembled the fax, loaded the paper, and installed the BJ Cartridge

, you can

make sure the fax is printing properly by making several copies of a document (see p. 4-1).

If you have problems printing, see Chapter 9.

Align the slot in the cartridge with the yellow post in the fax, and with the label facing
outwards, insert the BJ Cartridge

into the cartridge holder. Lower the cartridge lock

lever until you hear a click to lock the cartridge in place.

The yellow post (BJ Cartridge

guide) should be visible through the slot. The BJ Cartridge

tilts

slightly to the left before lowering the cartridge lock lever.

Close the printer cover.

If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page every time you insert a BJ Cartridge

You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEM
SETTINGS, p. 8-5.

• Do not try to manually move or stop the cartridge holder.
• Do not touch the components shown below or any metal parts.

Ribbon
cable

Guide rail

Round shaft

Circuit board

Summary of Contents for FAXPHONE B95





















































































































Search results

Summary of Contents for FAXPHONE B95

Reviews:

Related manuals for FAXPHONE B95

Brands by name

Popular brands

Canon FAXPHONE B95, User Manual

Search results

Summary of Contents for FAXPHONE B95

Reviews:

Related manuals for FAXPHONE B95

Brands by name

Popular brands