Canon FAXPHONE B95 Page 32 User Manual Download

Page: 32 / 116

2-10

Use [

] or [

] to select the week in which the daylight saving time starts.

Press [Start/Copy].

Use [

] or [

] to select DAY.

Press [Start/Copy].

Use [

] or [

] to select the day of the week on which the daylight saving time starts.

Press [Start/Copy].

Use [

] or [

] to select TIME.

Press [Start/Copy].

Use the numeric buttons to enter the time at which the daylight saving time will take
effect.

Press [Start/Copy].

Press [Function].

Use [

] or [

] to select END DATE/TIME.

Press [Start/Copy] twice.

Set the month, week, the day of the week, and time when the daylight saving time ends,
as in steps 6 to 12.

Press [Stop].

Setting ends and the fax returns to standby mode.

WEEK

SUNDAY

DAY

TIME

02:00

TIME

OCTOBER

Summary of Contents for FAXPHONE B95





















































































































Search results

Summary of Contents for FAXPHONE B95

Reviews:

Related manuals for FAXPHONE B95

Brands by name

Popular brands

Canon FAXPHONE B95, User Manual

Search results

Summary of Contents for FAXPHONE B95

Reviews:

Related manuals for FAXPHONE B95

Brands by name

Popular brands