9-14
LCD messages
The following messages are displayed on the LCD when the fax is performing a function or
encounters an error.
Message
Cause
Action
AUTO REDIAL
The fax is waiting to redial the
receiving number because the
line was busy or the receiving
party did not answer when you
tried to send the document.
Wait for the fax to
automatically redial the
number. If you want to cancel
automatic redialing, press
[Stop] (see p. 5-9).
BUSY/NO SIGNAL
The telephone number you
dialed is busy.
Try sending the document at a
later time.
The fax number dialed was
incorrect.
Check the fax number and dial
again.
The other party’s fax machine is
not working.
Contact the other party and
have them check their fax
machine.
The other party is not using a G3
machine.
Contact the other party and
ask them to send or receive
the document using a G3
machine.
The touch tone/rotary pulse
setting on your fax is incorrect.
Set your fax to the setting that
matches your telephone line
(see p. 2-6).
The receiving fax machine did
not answer within 55 seconds
(after all automatic redialing
attempts).
Contact the receiving party
and have them check their fax
machine. You can try to send
the document using manual
sending (see p. 5-4). For long-
distance call, add pauses to
the registered number (see p.
5-8).
CARTRIDGE JAMMED
The cartridge holder cannot
move. This is normally due to a
paper jam.
Clear the paper jam or
whatever is obstructing the
cartridge holder and then
press [Stop] and start again.
Do not attempt to move the
cartridge holder manually.
