Canon FAXPHONE B95 Page 12 User Manual Download | Manualshive

Page: 12 / 116

background image

xii

Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using
an acceptable method of connection. The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the
supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect
the equipment.

Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural areas.

The Ringer Equivalence Number is an indication of the maximum number of devices allowed to
be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the
devices does not exceed five.

CANON CANADA INC.

1-800-652-2666

24 HOURS A DAY, SEVEN DAYS A WEEK

For Canadian Users ____________________________

Canon Canada Inc., offers a full range of customer technical support* options:

• For interactive troubleshooting, e-mail technical support, the latest driver downloads and

answers to frequently asked questions (www.canon.ca)

• Automated interactive telephone support on most current products 24 hours, 7 days a week (1-

800-652-2666)

• Free live technical support Monday - Friday 9 am - 8 pm EST (excluding holidays) for

products still under warranty (1-800-652-2666)

• The location of the authorized service facility nearest you (1-800-652-2666)

If the problem cannot be corrected by using one of the above technical support options, repair
options are available at the time of your call to the Free live technical support number above or
via the website at www.canon.ca.

* Support program specifics are subject to change without notice.

Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

«
...
10
11
12
13
14
...
»

Summary of Contents for FAXPHONE B95





















































































































Reviews:

No comments

Related manuals for FAXPHONE B95

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 256

KXFG2451 - B/W Thermal Transfer

Brand: Panasonic Pages: 20

UF 8200 - Panafax - Multifunction

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 150

Brand: Panasonic Pages: 112

Brand: Panasonic Pages: 12

KX-FL521 - B/W Laser - Fax

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 50

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 84

Brand: Panasonic Pages: 104

Brand: Panasonic Pages: 24

Brand: Passap Pages: 25

Brand: Oki Pages: 923

Brand: Oki Pages: 1020

Brand: Nancy’s Knit Knacks Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands