Canon FAXPHONE B95 User Manual Download Page 95

Page: 95 / 116

9-6

• Discard the old BJ Cartridge

immediately according to the local laws and regulations for disposal of

consumables. You may want to place it in a plastic bag to keep any residual ink from spilling.

• Spilled ink can stain any surface; protect yourself and your work area.

Remove the new BJ Cartridge

from its package, then remove the orange protective cap

and tape

• Discard the cap and tape. Never attempt to reattach them to the BJ Cartridge

print head.

• Install the BJ Cartridge

immediately after removing the cap and tape.

• Spilled ink can stain any surface; protect yourself and your work area.

With the label facing outwards, and align the slot in the cartridge with the yellow post in
the fax, insert the BJ Cartridge

into the cartridge holder

. Lower the cartridge lock

lever

until you hear a click to lock the cartridge in place.

The yellow post (BJ Cartridge

guide) should be visible through the slot. The BJ Cartridge

tilts

slightly to the left before lowering the cartridge lock lever.

Close the printer cover.

If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page.
The fax prints a test page every time you insert a BJ Cartridge

• Load the paper in the multi-purpose tray before you replace the BJ Cartridge

• You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See

SYSTEM SETTINGS, p. 8-5.

Summary of Contents for FAXPHONE B95





















































































































Search results

Summary of Contents for FAXPHONE B95

Reviews:

Canon FAXPHONE B95, User Manual, Page: 95 / 116

Search results

Summary of Contents for FAXPHONE B95

Reviews: