Canon EOS RP, Advanced User'S Manual

Page: 204 / 612

204
Focus Bracketing
o
Focus bracketing is intended for still photo shooting on a tripod.
o
Shooting with a wider angle of view is recommended. After depth compositing,
you can crop the image if necessary.
o
The following lenses can be used (as of October 2018).
• RF35mm F1.8 MACRO IS STM
• RF50mm F1.2 L USM
• RF28-70mm F2 L USM
• RF24-105mm F4 L IS USM
• EF16-35mm f/4L IS USM
• EF24-70mm f/4L IS USM
• EF100mm f/2.8L MACRO IS USM
• EF180mm f/3.5L MACRO USM
• EF-S35mm f/2.8 MACRO IS STM
• EF-S60mm f/2.8 MACRO USM
o
Set [Exposure smoothing] to [Disable] with the following lenses, because
they may cause changes in image brightness.
• EF100mm f/2.8L MACRO IS USM
• EF180mm f/3.5L MACRO USM
• EF-S60mm f/2.8 MACRO USM
o
Suitable [Focus increment] settings vary by subject. An unsuitable [Focus
increment] setting may cause unevenness in composite images, or shooting
may take more time because more shots are taken. Take some test shots to
decide a suitable [Focus increment] setting.
o
Combining images may take some time when the [Number of shots] setting
is high.
o
Flash photography is not possible.
o
Shooting under flickering light may cause uneven images. In this case,
lowering the shutter speed may give better results.
o
Focus bracketing is not available when the lens's focus mode switch is set to
< MF >.
o
Canceling shooting in progress may cause exposure problems in the last
image. Avoid using the last image when combining the images in Digital Photo
Professional.