Canon EOS RP, Advanced User'S Manual, Page: 43 / 612

43
Inserting/Removing the Battery and Card
o
You cannot use batteries other than the Battery Pack LP-E17.
o
After opening the card slot/battery compartment cover, be careful not to swing
it back any further. Otherwise, the hinge may break.
Removal
(1)
1
Open the card slot/battery
compartment cover.
z
Set the power switch to <
2
>.
z
Check that the access lamp (1) is off,
then open the cover.
z
If [Saving...] is displayed on the screen,
close the cover.
2
Remove the battery.
z
Press the battery lock lever as shown by
the arrow and remove the battery.
z
To prevent short-circuits, always attach
the included protective cover (
=
40)
to the battery.
3
Remove the card.
z
Gently push in the card, then let it go to
eject.
z
Pull the card straight out.
4
Close the cover.
z
Press the cover until it snaps shut.