Canon EOS 700D Page 244 Instruction Manual Download

Page: 244 / 388

244

You can magnify a captured image by approx. 1.5x to 10x on the LCD
monitor.

Magnify the image.

Press the <

> button during image

playback.

The image will be magnified.

If you hold down the <

> button, the

image will be magnified until it
reaches the maximum magnification.

Press the <

> button to reduce

the magnification. If you hold down
the button, the magnification will be
reduced to the single-image display.

Scroll around the image.

Use the <

> key to scroll around the

magnified image.

To exit the magnified display, press
the <

> button and the single-

image display will return.

Magnified View

Magnified area position

In magnified view, you can turn the <

> dial to view another image at

the same magnification.

The image cannot be magnified during the image review immediately
after shooting.

A movie cannot be magnified.

COP

Summary of Contents for EOS 700D





































































































































































































































































































































































































Search results

Summary of Contents for EOS 700D

Reviews:

Related manuals for EOS 700D

Brands by name

Popular brands

Canon EOS 700D, Instruction Manual

Search results

Summary of Contents for EOS 700D

Reviews:

Related manuals for EOS 700D

Brands by name

Popular brands