Canon EOS 700D Page 159 Instruction Manual Download

Page: 159 / 388

159

You can select the AF method suiting the shooting conditions or subject. The
following AF methods are provided: [

(face)+Tracking

], [

FlexiZone -

Multi

] (p.161), [

FlexiZone - Single

] (p.162), and [

Quick mode

] (p.166).

AF methods other than the [

Quick mode

] use the image sensor to

autofocus while displaying the Live View image.

Select the AF method.

Under the [

] tab, select [

AF method

Select the desired AF method, then
press <

While the Live View image is
displayed, you can also press the
<

> button to select the AF method

on the Quick Control screen (p.151).

Human faces are detected and focused. If a face moves, the AF point
<

> also moves to track the face.

Display the Live View image.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

Select an AF point.

When a face is detected, the <

> AF point

will appear over the face to be focused.

If multiple faces are detected, <

will be displayed. Press the <

key to move the <

> frame over

the desired target face.

You can also tap the LCD monitor screen
to select the face or subject. If the subject
is not a face, < > will be displayed.

Changing the Autofocus Method (AF Method)

Selecting the AF Method

(face)+Tracking:

COP

Summary of Contents for EOS 700D





































































































































































































































































































































































































Search results

Summary of Contents for EOS 700D

Reviews:

Related manuals for EOS 700D

Brands by name

Popular brands

Canon EOS 700D, Instruction Manual

Search results

Summary of Contents for EOS 700D

Reviews:

Related manuals for EOS 700D

Brands by name

Popular brands