manualshive.com logo in svg

Canon EOS 700D, Instruction Manual, Page: 202 / 388

Share
Download
Canon EOS 700D Instruction Manual Download Page 202

202

Cautions when [Movie servo AF] is set to [Enable]

Shooting Conditions that Make Focusing Difficult

 

A fast-moving subject approaching or moving away from the camera.

 

A subject moving at a close distance in front of the camera.

 

Also refer to “Shooting conditions that make focusing difficult” on page 
165.

• Since using Movie Servo AF will consume battery power, the number of 

possible shots and the possible movie shooting time will be reduced.

• During zooming or image magnification, Movie Servo AF operation will be 

stopped momentarily.

•

During movie shooting, if a subject approaches / moves away, or if 
the camera is moved vertically or horizontally (panning), the 
recorded movie image may momentarily expand or contract (change 
in image magnification).

COP

Y

Summary of Contents for EOS 700D





































































































































































































































































































































































































Reviews:

No comments