Canon EOS 700D Instruction Manual Download Page 177

Page: 177 / 388

177

Shooting Movies

In the <

> mode, you can freely set the shutter speed, aperture, and

ISO speed for the movie shooting. Using manual exposure to shoot
movies is for advanced users.

Set the power switch to <

The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Set the Mode Dial to <

Set the shutter speed and
aperture.

To set the shutter speed, turn the
<

> dial. The settable shutter

speeds depend on the frame rate
<

•

: 1/4000 sec. - 1/60 sec.

•

: 1/4000 sec. - 1/30 sec.

To set the aperture, hold down the
<

> button and turn the <

dial.

Set the ISO speed.

Press the <

> button and press

the <

> key or turn the <

> dial

to select the ISO speed.

For details on the ISO speed, see the
next page.

Manual Exposure Shooting

> + <

COP

Summary of Contents for EOS 700D





































































































































































































































































































































































































Search results

Summary of Contents for EOS 700D

Reviews:

Brands by name

Popular brands

Canon EOS 700D, Instruction Manual

Search results

Summary of Contents for EOS 700D

Reviews:

Brands by name

Popular brands