Canon EOS 700D Page 170 Instruction Manual Download

Page: 170 / 388

170

You can magnify the image and focus precisely with manual focus.

Set the lens focus mode switch to
<MF>.

Turn the lens focusing ring to focus
roughly.

Display the magnifying frame.

Press the <

> button.

The magnifying frame will appear.

You can also tap [

] on the screen to

magnify the image.

Move the magnifying frame.

Press the <

> key to move the

magnifying frame to the position
where you want to focus.

To return the magnifying frame to the
center, press <

> or the <

> button.

Magnify the image.

Each time you press the <

> button,

the magnification within the frame will
change as follows:

Focus manually.

While looking at the magnified image,
turn the lens focusing ring to focus.

After achieving focus, press the <

button to return to the normal view.

Take the picture.

Check the focus and exposure, then
press the shutter button to take the
picture (p.146).

MF: Focus Manually

Magnifying frame

AE lock

Magnified area position

Magnification

→

10x

→

Magnification canceled

COP

Summary of Contents for EOS 700D





































































































































































































































































































































































































Search results

Summary of Contents for EOS 700D

Reviews:

Related manuals for EOS 700D

Brands by name

Popular brands

Canon EOS 700D, Instruction Manual

Search results

Summary of Contents for EOS 700D

Reviews:

Related manuals for EOS 700D

Brands by name

Popular brands