manualshive.com logo in svg

Canon EOS 700D, Instruction Manual, Page: 257 / 388

Share
Download
Canon EOS 700D Instruction Manual Download Page 257

257

X

 Editing a Movie’s First and Last Scenes

4

Save the edited movie.

 

Select [

W

], then press <

0

>.

X

The save screen will appear.

 

To save it as a new movie, select 
[

New file

]. To save it and overwrite 

the original movie file, select 
[

Overwrite

]. Then press <

0

>.

 

On the confirmation screen, select 
[

OK

], then press <

0

> to save the 

edited movie and return to the movie 
playback screen.

 

Since the editing is performed in approx. 1-sec. increments (position 
indicated by [ ]), the exact position where the movie is edited may differ 
slightly from the position you specified.

 

If the card does not have enough free space, [

New file

] will not be 

available.

 

When the battery level is low, editing the movie is not possible. Use a 
fully-charged battery.

COP

Y

Summary of Contents for EOS 700D





































































































































































































































































































































































































Reviews:

No comments