Canon EOS 700D Instruction Manual Download Page 375

Page: 375 / 388

375

Quick Reference Guide

Scene Intelligent Auto

Flash Off

Creative Auto

Portrait

Landscape

Close-up

Sports

Special scene

Night Portrait

Handheld Night Scene

HDR Backlight Control

All the settings necessary for
shooting are set automatically.
You just press the shutter button,
and the camera does the rest.

Basic Zone Modes

Basic Zone

At the

position, press the <

> button, select the shooting

mode icon with <

> key, and turn the <

> dial to set the

shooting mode.

Basic Zone Modes

If necessary, the built-in flash will be raised and fire automatically
in low-light or backlit conditions (except in the <

> <

> modes).

Using the Built-in Flash

Creative Zone Modes

Press the <

> button to raise the

built-in flash, then shoot.

COP

Summary of Contents for EOS 700D





































































































































































































































































































































































































Search results

Summary of Contents for EOS 700D

Reviews:

Canon EOS 700D, Instruction Manual, Page: 375 / 388

Search results

Summary of Contents for EOS 700D

Reviews: