![background image](http://html.mh-extra.com/html/canon/elura10-a/elura10-a_service-manual_58449112.webp)
ELURA20 MC A, ELURA10 A
CHAPTER 4. DISASSEMBLING ADJUSTMENT
4-17
1-17 Disassembly of LCD Unit 2
(2) Remove CN901, CN902, CN903, unsolder at two places (B), and remove two screws (h × 2) to detach the LCD P.C.B., LCD
Shield the Back Light Unit and LCD Panel.
< Note on Reassembling >
(1) Cover the element on the LCD P.C.B. with UL tape. Note, however, that UL tape should be attached so taht it will not protrube
from the LCD P.C.B.
(2) Mount the LCD P.C.B., LCD Shield and the Backlight Unit as in the Fig.4-16.
Fig. 4-16
Note on Reassembling (2)
Note on Reassembling (1)
(1)
(1)
(1) - h
(1) - h
UL Tape
Be sure to cover this
element without fail.
Attach UL tape so that it will not protrude
beyond the side edge of the PCB.
LCD P.C.B.
LCD Shield
Back
Light Unit
1 : Pass the Back Light Wire through the hole
in LCD P.C.B.
2 : Bend the Back Light wire, solder it,and fold the LCD
shield through 180 along the edge of the LCD P.C.B.
Before passing the wire through the hole,
fit the protrusion at the perforations
in the LCD P.C.B. unit into the hole of the
Back Light Unit.
Bending direction
Solder here.
Bending direction
LCD Panel
CN901
CN902
CN903
IC902
T4201
CN901 CN902
CN903
IC902
T4201
CN901 CN902
CN903
(1) - B
(1) - B
h
Metal
M1.7
2.5mm
LCD
Shield
Summary of Contents for ELURA10 A
Page 150: ...5 16 ELURA20 MC A ELURA10 A CVF Unit Section 15 14 9 8 13 12 11 6 5 1 2 3 4 7 16 17 10 ...
Page 152: ...5 18 DMC II Mechanical Chassis Section 1 1 4 2 3 6 7 10 11 12 5 4 2 3 8 9 Slide Chassis Ass y ...
Page 158: ...5 24 DMC II Mechanical Chassis Section 4 REAR FACE 1 2 2 5 6 7 8 9 5 10 11 12 1 13 14 3 4 ...