ELURA20 MC A, ELURA10 A
CHAPTER 1. GENERAL DESCRIPTION OF PRODUCT
1-47
7-4 Battery Level display, Warning Displays and (Low-Power) Power Shutoff
Battery Level Display
• When a battery is used, the 5-step battery level display before the low power warning is displayed (100%, 75%, 50%, 25%, 0%
(approx.)) will be reset when the power is turned OFF. In other words, if the voltage is restored while the power is OFF, the
battery level display will show an increase when the power is again turned ON. Once the low-power display has appeared,
however, the low-power warning will not be reset, even if the voltage is restored.
• When the AC adapter is used, there is no battery level display. If the voltage should drop drastically below the warning level
warning, however, the battery level warning will appear. Also, the battery level warning will turn OFF when the battery voltage
rises above the power-OFF warning level.
7-5 System Data Display
* The time code display is “-: -: -: -:” for unrecorded sections and when there is no tape.
* CGMS: not output to LINE OUT and CVF (panel) when copying is prohibited.
7-6 Data Code display
Data code can be used to turn displays ON and OFF independently (without regard to other on-screen text displays.)
7-7 MP Tape Capability
LP as well as ESP and ELP recording is not possible with MP tape. Even if LP, ESP or ELP is selected from menu, the SP mode will
always be set when a tape is loaded. LP playback is possible with tapes recorded in the LP mode.
7-8 Warning Buzzer
The warning buzzer will sound melodically in the following cases.
REC PAUSE (*) includes audio dubbing and AV insert REC PAUSE.
* Peep = 4KHz; beep = 2KHz; boop 1KHz
Camera mode
VCR mode
Camera screen
Rec search
DIF input
Blue background
PB (special playback)
Data code (date/time)
× LANC appears
× LANC appears
× - - -
~ - - -
●
Data code (camera data)
×
×
× F - - -, etc.
× F - - -, etc.
●
Time code
●
●
●
Body
●
●
Audio mode (12/16 bit)
●
4-sec. display
×
●
DIF
×
●
Wide/normal
●
Setting display
×
●
DIF
×
●
CGMS (warning)
~
●
●
DIF
×
●
SP/LP
●
Setting display
●
●
Setting display
●
Setting display
●
Mode
Tone color
Power on
Peep
When a cassette tape whose erase protection knob is set to Save is loaded (Camera mode)
Peep, peep, peep
When the EJECT cover is left open (including power off)
Peep, peep
When recording starts (Camera mode)
Peep
During REC PAUSE (Camera mode)
Peep, peep
Photo button partially pressed OK
Peep, peep
Photo REC start
Peep
When condensation is detected, when a camera error occurs, and 5 sec.
Beep × 5
before the REC PAUSE (*) 5-min. timer ends
When the Setting button is operated while menu selection is not possible
Boop
20 sec., 15 sec., and 10 sec. before the REC PAUSE (*) 5-min. timer ends
Beep, beep, beep
Seiftimer (syncs with tally blinking)
Peep, peep, 1-sec. interval × 8
Peep, 0.25-sec. interval × 8
Summary of Contents for ELURA10 A
Page 150: ...5 16 ELURA20 MC A ELURA10 A CVF Unit Section 15 14 9 8 13 12 11 6 5 1 2 3 4 7 16 17 10 ...
Page 152: ...5 18 DMC II Mechanical Chassis Section 1 1 4 2 3 6 7 10 11 12 5 4 2 3 8 9 Slide Chassis Ass y ...
Page 158: ...5 24 DMC II Mechanical Chassis Section 4 REAR FACE 1 2 2 5 6 7 8 9 5 10 11 12 1 13 14 3 4 ...