Canon DZ-3600U User Manual Download Page 93

Page: 93 / 122

Assembly, Knock-Down and
Power On/Off

Use the following procedures to assemble, knock-down and turn the power on
and off the DZ-3600U.

Assembly and Knock-Down

For assembly instructions, see page 26.
For knock-down instructions, see page 37.

Turning On the Power

Press the ( | ) side of
the power switch, which
is located on the left
side of the main unit.

• The power in the main unit

will come on and the power
indicator on the control
panel (the front panel on
the main unit) will light.

Turn on the power of
the other connected
devices (video monitor,
etc.).

Turning Off the Power

Press the ( ) side of
the power switch, which
is located on the left
side of the main unit.

• The main unit will power

down.

Turn off the power of
the other connected
devices (video
monitor, etc.).

POWER

Summary of Contents for DZ-3600U



























































































































Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands

Canon DZ-3600U, User Manual

Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands