Canon DZ-3600U User Manual Download Page 57

Page: 57 / 122

Opening Saved Images

Presentation Software files saved to disk can be opened and displayed.

!!! Important !!!

• Only files saved in the Presentation Software file format with a “.PIH”

file extension can be opened. Image files in standard file formats, such
as JPEG or bitmap images, cannot be opened.

• Opening a file causes the unsaved images that have been captured up to

that point to be lost. If there are unsaved images when you attempt to
open a file, a confirmation message will display. Use this message to
save or erase these images.

Preview Mode

Still Mode

Click the (

) button.

• A menu will display.

Click [Open History].

• The Open dialog will display.

Select the file
you wish to
open and click
the [Open]
button.

• The previously

saved file will
open and display
in Presentation
Software.

Still

Mode

Preview

Mode

Summary of Contents for DZ-3600U



























































































































Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands

Canon DZ-3600U, User Manual

Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands