Canon DZ-3600U User Manual Download Page 78

Page: 78 / 122

An Intr

oduction to the F

eatur

Shooting Negatives

To view negative films, turn on the backlight and switch to negative mode.

Ensure that the backlight is lit (P.77).

Procedure with the Remote Control

This function cannot be controlled with the remote control.

Procedure with the Control Panel

To Switch to Negative
Mode

Press the [NEGA] button.

• The mode will switch between the positive

and negative mode each time the button is
pressed.

• The indicator will light up in negative mode.

Procedures Required for showing Negative Films

1. Press the [NEGA] button and then place the negative film strip in

the center of the backlit object stage.

2. Zoom up on the desired frame until it fills the window.
3. Press the white balance [Auto] button on the control panel.

The auto indicator will shut off.

4. Press the white balance [Auto] button again after you have

finished viewing the frame.

The auto indicator will light and the auto white balance function will
be reactivated.

Procedure with a Computer

This function cannot be controlled from a computer.

SOFT

HARD

RED

BLUE

MANUAL

AUTO

POWER

CAPTURE RESOLUTION PREVIEW

WHITE BALANCE

NEGA

DETAIL

Preview

Mode

Summary of Contents for DZ-3600U



























































































































Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands

Canon DZ-3600U, User Manual

Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands