Canon DZ-3600U User Manual Download Page 82

Page: 82 / 122

An Intr

oduction to the F

eatur

Moving the Finger Pointer

The finger pointer can be moved in all four directions within the display.

Procedure with the Remote Control

To Move the Finger
Pointer

Press the appropriate cursor
button ( ) ( ) ( ) ( ).

• The finger pointer will move in the

direction indicated by the cursor
button.

• Press continuously on any cursor

button to keep moving the finger
pointer in that direction.

Procedure with the Control Panel

This command cannot be executed with the control panel.

Procedure with a Computer

To Move the
Finger
Pointer

Drag the finger
pointer to the desired
position.

• The finger pointer can

be moved freely about
by clicking it with the
mouse and dragging it
to a new position.

FOCUS

BRIGHTNESS

–

COLOR

AUTO

NEAR

FAR

APP

REV

FWD

ROTATE

▼

Using the Finger Pointer

Summary of Contents for DZ-3600U



























































































































Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands

Canon DZ-3600U, User Manual

Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands