Canon DZ-3600U, User Manual

Page: 108 / 122

109
Appendix
Changing the Remote Control
Batteries
Follow the procedures below to install or replace the batteries in the remote
control.
1.
Open the battery cover by
pressing down and sliding the
back panel of the remote
control that is marked [Open].
2.
If there are spent batteries
inside the battery chamber,
remove them.
4.
Slide the battery cover up
from the bottom until it closes
with a click.
!!! Important !!!
• Do not use rechargeable batteries. (The shape and performance charac-
teristics may not operate the remote control correctly.)
• Do not mix new and spent batteries together.
• Remove the batteries if the unit will not be used for a long period.
Remove any battery fluids that leak and replace the leaking cells.
Remote Control
3.
Insert two AA batteries,
orienting the battery
terminals (“+” and “-” end)
in the direction shown on the
diagram in the battery
chamber. Do not insert the
batteries incorrectly.
• Insert the negative (-) end of the
battery into the battery chamber
first.