Canon DZ-3600U User Manual Download Page 105

Page: 105 / 122

106

Removing the Equipment
from the Box

This topic explains how to remove the DZ-3600U Digital Document Camera
from the packaging in which it is shipped.

!!! Important !!!

• Always use two adults to remove or replace the unit in the packaging.
• Always securely fasten the camera head with tape when transporting the

equipment.

• Save the packaging to transport the equipment in the future.

••• Note •••

• Although this equipment is primarily used in institutional settings and set

up by service personnel or dealers, these instructions are provided in case
the users need to move or transport the equipment.

Open the lid of the box.

Lift the main unit out of
the box with the packing
materials still attached.

Remove the accessories
from around the main unit.

Support the main unit
while the packing materials
are removed from each end.

Remove the plastic wrap
from around the main
unit.

Summary of Contents for DZ-3600U



























































































































Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands

Canon DZ-3600U, User Manual

Search results

Summary of Contents for DZ-3600U

Reviews:

Related manuals for DZ-3600U

Brands by name

Popular brands