Canon DU7-1101-000 Service Manual Download Page 78

Page: 78 / 255

2-62

CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 2 OPERATIONS

3] The feeding belt is rotated to move the original to the reversing assembly. At this time, the lead-

ing edge of the first original is butted against the reversing roller to remove the skew.

Figure 2-269

4] The reversing roller and the feeding belt are rotated to move the original to the copyboard glass.

The first original is moved for a specific length by the feeding belt after its trailing edge has

moved past the pre-registration roller sensor (S2), and is stopped.

Figure 2-270

5] The copier's scanner starts to make a copy.

Figure 2-271

Butted.

Pre-registration
paper sensor (S2)

Copy

Summary of Contents for DU7-1101-000





















































































































































































































































Search results

Summary of Contents for DU7-1101-000

Reviews:

Related manuals for DU7-1101-000

Brands by name

Popular brands

Canon DU7-1101-000, Service Manual

Search results

Summary of Contents for DU7-1101-000

Reviews:

Related manuals for DU7-1101-000

Brands by name

Popular brands