COPYRIGHT © 1999 CANON INC.
CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-27
CHAPTER 3 MECHANICAL SYSTEM
Figure 3-337
Figure 3-338
Figure 3-339
7) Remove the E-ring [14] and the gear [15]
of the separation roller [9].
Caution:
The gear holds a pin. Take care not to
lose it when removing the gear.
8) Remove the E-ring at the rear of the sepa-
ration roller [9]; then, detach the separation
belt [17].
8.
Removing the Reversing Roller
1) Remove the reversal motor unit. (Figure 3-
201)
2) Remove the two screws [1] of the pickup
front side plate side, and disconnect the
connector [2]; then, detach the pre-revers-
ing solenoid unit [3].
[9]
[14]
[15]
[16]
[17]
[9]
[2]
[1] (M3×4)
[1] (M3×6)
[3]