Canon DU7-1101-000 Service Manual Download Page 60

Page: 60 / 255

2-44

CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 2 OPERATIONS

4] The copier starts to make a copy by moving its scanner.

Figure 2-242

5] When the copier's scanner starts to move in reverse, the feeding belt is rotated to move the first

original in the direction of delivery.

At the same time, the second original is picked up.

Figure 2-243

6] The first and second originals are moved by the feeding belt; the feeding belt is rotated for a

specific length after the trailing edge of the second original has moved past the pre-registration

roller paper sensor (S2) to stop the second original at a specific position.

The first original is delivered by the delivery roller.

Figure 2-244

Scanning lamp

2nd original

1st original

Pre-registration roller
paper sensor (S2)

Delivery roller

Summary of Contents for DU7-1101-000





















































































































































































































































Search results

Summary of Contents for DU7-1101-000

Reviews:

Related manuals for DU7-1101-000

Brands by name

Popular brands

Canon DU7-1101-000, Service Manual

Search results

Summary of Contents for DU7-1101-000

Reviews:

Related manuals for DU7-1101-000

Brands by name

Popular brands