Canon Color imageRUNNER C4580, Service Manual

Page: 567 / 851

Chapter 14
14-9
T-14-1
14 Server
schedule is
invalid Illegal schedule transmission
information is set in UGW. (Ex:
Every 30 minutes were set to
UGW but the right interval in e-
RDS is 1 hour.) Correct the schedule transmission
information setting in UGW. (Ex:
every 1 hour)
15 Server
response time
out There was no reply from UGW in
predetermined time.
(The congestion of the network
etc.)
It is the timeout at HTTPS level. After waiting for a while, try again.
16 Service not
found The URL of UGW is illegal, and
UGW is inaccessible. Check and correct the URL of UGW.
17 E-RDS switch
is set OFF You execute the communication
test while the E-RDS switch is
OFF. Turn ON E-RDS switch, and execute
the communication test.
18 Server
schedule is not
exist The e-RDS receives empty
schedule data from UGW. Check setting file. (Call the help desk
of UGW.)
19 Network is not
ready, try later You execute the communication
when the connection to the
network has not been established.
(The network connection might
not be established from the start-
up of the device for 60 seconds.) Confirm that the network connection
has been established. Moreover,
execute again after enough waiting.
20 URL error Illegal URL (Syntax error etc.) Correct URL.
Error string Cause Counter Measure