Canon Color imageRUNNER C4580, Service Manual

Page: 720 / 851

Chapter 19
19-75
W/SCNR For copy models, sets whether scanner is present.
The setting value takes effect after the main power switch is turned OFF/ON.
Setting values
0: Printer model
1: Model with scanner
Reference The setting will automatically change to '1' upon detection of the presence of a scanner
(printer model).
1
RUI-DSP Used to select copy function in remote UI.
0: Display copy the screen in remote UI[Factory default/After RAM clear]
1: Don't display copy screen in remote UI
1
ADJ-LVL Sets execution mode for image stabilization control performed after preset number of sheets.
Sets execution mode (adjustment set data) for forward/reverse operation of copy or print jobs and
image stabilization control done between sheets.
Reference:
Changing the setting of this item lets you shorten the execution time for image stabilization control,
a process performed after a preset number of sheets since the previous adjustment, or in a set time
interval.
Setting values
0: Normal mode [Factory default/After RAM clear]
Adjustment set 1: Discharge current volume control, single-cycle ATVC control, ATR control,
image position compensation
Adjustment set 2: Discharge current volume control, single-cycle ATVC control, ATR control,
SALT-Dmax control, image position compensation
1: Compression mode 1
Adjustment set 1: Discharge current volume control, single-cycle ATVC control, ATR control,
image position compensation
Adjustment set 2: Discharge current volume control, single-cycle ATVC control,
1
INTROT-1 Sets the execution interval (number of sheets) for image stabilization control (adjustment set 1) during
forward/reverse operation.
Sets the interval in which automatic adjustment control (adjustment set 1) is performed during
forward/reverse operation of copy or print jobs.
Reference:
If this item is set to a larger value than the setting value for image stablization control (adjustment set
2) (COPIER > OPTION > BODY > INTROT-2), the setting value for this item is invalid.
When the adjustment set 2 (INTROT-2) process is performed, the adjustment set 1 (INTROT-1)
process is considered to have been performed.
The count is reset in the following cases:
- When the number of sheets reaches the specified value
- When an image stablization control process including the control items performed by this item is
performed
Increasing the interval in which the control process is performed may adversely affect the density
fluctuation.
When the setting value for the COPIER >OPTION > BODY > ADJ-LVL item is 2, the set
1
COPIER>OPTION>BODY